MULEHIDE
Single Ply Membranes
Solutions for Every Low-Slope Roof Challenge
Regardless of project size, MHP commercial roofing systems have buildings covered. From fully adhered EPDM systems with Acrylic Water Base Bonding Adhesive to heat-weld membranes, MHP has a solution for every low-slope roof challenge.

EPDM
Known for low-maintenance and weatherabilty, EPDM (ethylene propylene diene monomer) is the optimal choice in many geographies. In northern climates, black EPDM membrane harnesses solar energy, equating to reduced heating costs in the winter.

PVC
Polyvinyl Chloride (PVC) is a trusted membrane with decades of proven performance in Europe and North America. Like TPO, it also offers the potential for decreased cooling costs.
System Options
Three installation methods are available depending on building design and performance requirements including location, climate, wind and height:

Fully Adhered
Glued
Membranes in a fully adhered systems are installed with adhesives including bonding adhesive with low-VOC and water-based formulas.

Mechanically Attached
Fastened
Mechanically fastened roof systems are held in place by concealed plates and fasteners secured through the membrane and into the deck.

Fully Adhered
Glued
Membranes in a fully adhered systems are installed with adhesives including bonding adhesive with low-VOC and water-based formulas.


Fully Adhered
Glued
Membranes in a fully adhered systems are installed with adhesives including bonding adhesive with low-VOC and water-based formulas.

Mechanically Attached
Fastened
Mechanically fastened roof systems are held in place by concealed plates and fasteners secured through the membrane and into the deck.

Fully Adhered
Glued
Membranes in a fully adhered systems are installed with adhesives including bonding adhesive with low-VOC and water-based formulas.

Available Colors
Standard Colors

Standard Colors
